MXR Distortion + Mods
Distortion+ Modifications - Free:
More Distortion:
 |
Replace the 4.7k-ohm resistor with a 2.2k-ohm resistor and the .047uf capacitor with a 0.1uf capacitor. The picture is of an older Distortion + and the parts are circled. On the newer ones, It is the big capacitor near the top of the board marked C4 and the resistor connected between C4 and lug 3 of the Distortion pot. The resistor should have yellow-violet-red-gold bands on it. |
© Copyright Griffin Effects 2012. All images and context in this document are property of Griffin Effects and may not be altered.