Choose your modifications from the drop-down menu then choose "New Pedal" to get the mod installed in a new pedal or "Your Pedal" to send us your pedal and we will install it.
Create the ultimate wah!
True Bypass - Gets rid of that bad tone sucking bypass. A quality 3pdt is used to give it true bypass so you can maintain your tone.
Add LED - ONLY choose a LED color if you choose the True Bypass Mod. The LED doesn't apply to the other mods. Add a 5mm LED to your pedal to tell when it's on or off. No more guessing or trying to figure out what's going on and then realizing your wah has been on the whole time! Requires drilling a hole. Choose the color you want in the options above. If you don't want a LED, choose black/none.
Output Buffer - Add an output buffer so your wah plays nice with other pedals. The buffer will be installed so that it's only active
when the pedal is on if you choose the true bypass mod also. This will mean the pedal will still be true bypass.
Q Control - Adds a potentiometer that varies the vocal content of the wah. Goes all the way from no vocal content to a lot of vocal content. More vocal content than the stock pedal. Requires drilling a hole. Knob may vary due to stock on hand.
Sweep Switch - A toggle switch to add more bass to the sweep of your wah so you don't loose the bottom end anymore. One position is stock and the other adds bass. Requires drilling a hole.
These mods will work with:
GCB-95 All Revisions, GCB-100, ZW-45, JH-1, JC95
To send your pedal in for modification, print and fill out this Modification Form and send it in along with your pedal. All the information you need will be on the form.
Limited 5 year warranty